General Gaming Article

General Gaming Article


Newegg Daily Deals: Corsair Carbide SPEC-03 Case, Asus 24X DVD Burner, and More!

Posted: 16 Nov 2015 10:49 AM PST

Corsair Carbide Series Case

Top Deal:

If you're new to the wonderful world of building your own PCs, then congratulations, you skipped the era of slicing and cutting flesh on boring (and sharp edged) beige cases. These days the landscape is littered with options, and you don't have to spend a ton of money on a nice chassis. Case in point -- today's top deal for a Corsair Carbide Series SPEC-03 Black Steel ATX Mid Tower Gaming Case for $45 with free shipping (normally $79; additional $15 Mail-in rebate). It has an aggressive looking design coupled with a modern layout and flexible cooling options.

Other Deals:

BenQ GL2460HM Black 24-inch 2ms (GTG) HDMI Widescreen LED Backlight LCD Monitor for $120 with free shipping (normally $140 - use coupon code: [EMCKBKP38])

Asus Radeon R9 2GB 256-Bit GDDR5 PCI Express 3.0 HDCP Ready CrossFireX Support Video Card for $170 with free shipping (normally $180 - use coupon code: [EMCKBKP23]; additional $20 Mail-in rebate)

MSI 970A-G43 AM3+ AMD 970 AMD Motherboard for $55 with free shipping (normally $80; additional $10 Mail-in rebate)

Asus 24X DVD Burner - OEM for $15 with free shipping (normally $20 - use coupon code: [EMCKBKP22])

FCC Clarifies Stance on Third-Party Router Firmware

Posted: 16 Nov 2015 10:36 AM PST

Keep calm and hack on

Linksys WRT1900ACS

Just to be clear, the Federal Communications Commission (FCC) isn't interested in blocking third-party router firmware like DD-WRT, nor does the government agency think you shouldn't be allow to hack your wireless box.

The FCC felt the need to address the topic after one of its recent proposals sparked an outcry from the Internet community and generated "thousands of comments from individuals concerned that the proposal would encourage manufacturers to prevent modifications or updates to the software used in devices such as wireless local area networks (e.g., Wi-Fi routers)." 

Specifically, the FCC in October proposed new rules for approving radio frequency devices. What had people up in arms was a section dealing with security in which the FCC wanted device makers to "describe in detail how the device is protected from 'flashing' and the installation of third-party firmware such as DD-WRT."

It read as if the FCC was pushing for router makers to block the installation of third-party firmware, though the FCC is now saying it has no intention of locking down such devices.

"One of our key goals is to protect against harmful interference by calling on manufacturers to secure their devices against third party software modifications that would take a device out of its RF compliance. Yet, as the record shows, there is concern that our proposed rules could have the unintended consequence of causing manufacturers to 'lock down' their devices and prevent all software modifications, including those impacting security vulnerabilities and other changes on which users rely," the FCC said in a blog post. "Eliciting this kind of feedback is the very reason that we sought comment in an NPRM and we are pleased to have received the feedback that will inform our decision-making on this matter."

The FCC admitted that its wording "prompted a fair bit of confusion" but insists that, simply put, it's not attempting to mandate the wholesale blocking of open source firmware modifications.

To address this, the FCC revised its proposed rules to state that it's mainly interested in ensuring that such modifications don't alter such devices in ways that would make them illegal.

"Describe, if the device permits third-party software or firmware installation, what mechanisms are provided by the manufacturer to permit integration of such functions while ensuring that the RF parameters of the device cannot be operated outside its authorization for operation in the U.S.," the revised proposal reads.

In short, the FCC is totally fine with third-party firmware, so long as the firmware doesn't alter your router to where it operates illegally, such as having the ability (or consequence of) causing interference.

Follow Paul on Google+, Twitter, and Facebook

Microsoft Lumia 950 Lands Exclusively at AT&T November 20

Posted: 16 Nov 2015 09:27 AM PST

New Windows 10 phone coming soon

Microsoft Lumia 950

The Windows 10 party has already started in earnest on the desktop, and come this Friday, November 20, it will extend to mobile with the launch of Microsoft's Lumia 950, its first Windows 10 smartphone.

Much to the chagrin of competing wireless carriers not named AT&T, the modern day Ma Bell will be the only carrier in the U.S. offering the new handset, with pre-order sales kicking off tomorrow in-store and on AT&T's website, the company announced today.

Microsoft might be shooting itself in the foot by only making the Lumia 950 available through AT&T. To be fair, things worked out pretty well for Apple and its iPhone, which also started out as an AT&T exclusive, but sales really exploded when Apple expanded availability to other wireless carriers. Given the market share gap between Microsoft's mobile devices and iOS and Android, along with Microsoft's ambitious strategy to unite different product categories through a single ecosystem, it's easy to question (and criticize) Microsoft's decision here.

Launch politics aside, the Lumia 950 sports a 5.2-inch Quad HD OLED display (2560x1440). It also has a Qualcomm Snapdragon 808 processor, 3GB of RAM, 32GB of internal storage, a microSD card reader, 5-megapixel front camera, 20-megapixel rear camera with triple LED flash and 4K video capture, and of course Windows 10.

One of the neat things about the Lumia 950 is that it will work like a PC when taking advantage of the new Continuum feature and Microsoft Display Dock HD-500, a separately sold accessory. When hooked up to a monitor, keyboard, and mouse, you can use the Lumia 950 like a Windows 10 system without giving up simultaneous phone functionality like talking and texting.

AT&T will offer the Lumia 950 for $150 with a two-year commitment, or at various monthly price points through its Next program, including $19.97/month (30 months), $24.96/month (24 months), and $29.95/month ($20 months).

Follow Paul on Google+, Twitter, and Facebook

NextDesk Air Review

Posted: 16 Nov 2015 12:00 AM PST

At a Glance

Up (+): Extremely well made; motors hidden in column; quiet compared to others; looks fantastic.

Down (-): Pricey; get 100% of the Air's function at 20% of the cost with other desks (but won't look as good); buggy software.

The ultimate desk

We often talk about the best possible computing experience, but that's almost always regarding the system. How much GPU horsepower can be had, the highest clock speed we can squeeze out of our CPU, and having multi-monitor setups. But what's equally as important as our system specs is where and on what we actually do our actual computing.

There's no sense in having the ultimate in performance if the chair you sit on is going to lead to an aching back and sore butt cheeks. The same holds true for a desk. We've used a number of "platforms." From cubicle desks to big office desks to low-cost IKEA desks that wobbled to dinner tables. In terms of finding that perfect working surface, the only thing we haven't tried is a picnic table.

NextDesk Air
The NextDesk Air.

Picking the perfect desk is not easy, and we highly recommend some serious research into finding one that's just right for you. Many factors go into finding a good desk, and all are important to examine: surface type, stability, material, and construction quality. Solid wood will last longer compared to laminate surfaces that may wear out over time or worse, peel at the seams. Is the desk stable, or does it shake when you're typing or moving your mouse, causing your display to shake? Does the desk feel cheap, or does it feel well designed?

If you seriously care about your work surface, and feel like your ultimate rig deserves the ultimate platform, we think we've found the desk for you.

Enter the NextDesk Air

The first thing you should know about NextDesk is that it does not make your average, run-of-the-mill desks. The company is known for making sit/stand desks that are more on the side of presentation pieces than simple working surfaces. If you're looking for a simple solution to sit your display and keyboard on, there's no reason to read further. If you're seeking both style and functionality, read on.

The second thing you should know about NextDesk is that its products are not cheap. Much like most things in the world, you get what you pay for, and NextDesk desks are not an exception. Be prepared to spend anywhere from $1,000 to $5,000, depending on your model and configuration. The Air isn't the desk for most people; it's for those that are looking for the best electronically height-adjustable desk that also looks like it belongs in an art gallery.

Build quality

The Air is substantial. NextDesk uses aluminum throughout the build: legs, feet, primary surface, cross-bar, vanity cover, and leveling pads. There's weight to every component. Now, some might say that just because something weighs a lot doesn't mean it's of high quality, which is true. However, in the case of the Air, every part exudes quality.

The desk is actually delivered to you on a shipping pallet, not by FedEx or UPS, but by a freight trucking company. The flat-packed box sits no higher than six inches. Don't let it fool you though, this thing requires at least two people to lift. In fact, the shipping notice we received indicated 290 pounds.

Once inside your work area, the assembly process for the Air is fairly straightforward. The desk is assembled upside down and requires two people to turn the completed desk right-side up.

The packaging
The Air's packaging.

The underside of the Air's desk surface is pre-mounted with several components: the drive controller and plates for accessories such as a keyboard tray. The mounting holes are pre-drilled onto solid plates of aluminum that are already mounted onto the desk. Our configuration came with a vanity cover for cable management, as well as a 12-outlet surge-protected power splitter made by Belkin.

The direction of the power supply is swappable by removing one screw, sliding off the splitter, and reattaching in reverse.

Integrated power strip
The Air's integrated power strip.

The motorized legs attach to both sides of the desk via 4 heavy-duty hex screws. NextDesk supplies all the tools you need to assemble each component. The feet then attach to the bottom of each leg.

Gen 1 columns have the chain visible; gen 2's do not.
Gen 1 columns have the chain visible; gen 2's do not

Once attached, each leg's power cable is attached to the main leads of the controller, which are already pre-mounted to the desk. In the above photo, you can see that NextDesk uses heavy-duty chains to smoothly move the desk surface.

Unlike most, if not all moving desks, the entire motor assembly is hidden inside the leg, one for each leg.

The Air's central nervous system
The Air's central nervous system.

Both legs connect to the power supply via 6-pin connectors not unlike those you find on modular power supplies. 

Once the feet are attached to the legs, you're essentially done. You can also order solid aluminum leveling pads that attach to the bottom of each foot, which allow you to fine-tune the surface balance in case of an uneven floor. We elected to order these. NextDesk also offers casters. Three casters or three leveling pads attach to each side.

Putting together the Air really lets you see the attention to detail as well as component quality that NextDesk puts into its products. From the screws to their mounting holes, components come together with fit and form in a manner difficult to convey in words. While screws and their drilled holes coming together perfectly may seem like a small thing, it's a detail that shouldn't be overlooked. To get a full understanding of what we mean here, you'll have to build one to know. If you can't, think of a time you had a product in your hand that just made you think "wow" when it came to craftsmanship.

Completed assembly without glass top
Completed Air assembly without glass top.

Once assembly is done, the desk is flipped over and the glass surface is placed on top. You can choose to lay the glass directly onto the aluminum surface or use the clear rubber stand-off pads.

The glass surface adds a striking appearance.
The glass surface adds a striking appearance.
Using the desk

Solid and sturdy are two words that come to mind when you're finally done with assembly and first sit at the Air. It's well planted and there's little to no movement when you're typing or gaming.

At its standing height, the Air is slightly more sensitive to movement than when lowered, but this is to be expected of any desk on two legs. There's just no getting around physics. We didn't find it distracting and it can be reduced greatly by making sure the desk is leveled on a solid floor. Being able to adjust the level of the desk at 6 different points helps greatly if you get the leveling pads, which we highly recommend. If you want the ultimate in stability, NextDesk offers the Air Pro which sits on 4 columns. But make no mistake though, the Air itself is very stable as is.

The Nextdesk Air Pro
The Nextdesk Air Pro

Of course, the key feature of the Air is its height adjustability. It rises or descends using the control panel on the right of the desk or via the Desk Control application on your computer if you elect to order with Pulse, which is a combination of software and hardware. The Pulse module connects to the main drive unit via an RJ15 connector, then to your PC via USB. This allows you to adjust the desk from Windows or OS X using NextDesk Desk Control. But Pulse doesn't just do adjustments. For calorie-burning conscious folks, Pulse can be set to remind you when to sit and stand, for how long, and let you know how many calories you're burning as you stand.

Granted, standing still really doesn't burn many calories, but it's still cool to see. Pulse's stand-reminder feature was more useful—the notification would pop up on our screen to let us know when we were sitting on our butts for too long.

At its lowest point, the Air's desktop sits 24 inches off the floor; it can be raised to 50 inches at its highest point. It rises at 1.7 inches per second and produces roughly 60 decibels during movement. The controller also has collision detection for both directions, and stops the desk if something gets in the way.

Transitioning is smooth and uneventful. The desk moves relatively quietly, but does produce a whirring sound while in motion. It's not noticeable in short adjustments but it is in long ones. It's not completely silent, but it's not loud either. Be aware though that when waking up from sleep, the motors will produce noticeable "engagement" sound. Adjustments after the initial movement from wake up don't produce the sound, but the first one always does after wake.

Our primary gripe with adjusting the Air—and this applies to all other NextDesk desks—is that you have to hold down the memory position buttons for the full transition. We would have preferred a single press. Using the Desk Control app allows you to adjust height from your PC, but it's simply faster to use the controls on the desk itself. One issue with the app is the memory settings don't correspond to the settings on the desk. We notified NextDesk of this issue, and the company says a fix is on the way.

Desk Control app is neat but buggy
The Desk Control app is neat but buggy.

Our friends over at TheWireCutter picked the NextDesk Terra as their ultimate standing desk option, even above their "best" recommendation for "most people." They said: "The NextDesk Terra is the best-looking sit/stand desk you can get. It has a sleek aluminum frame, solid bamboo top, and beautiful, refined accessories. If you can fit it into your budget and want the best, this is it."

If you're not a fan of the glass surface, you can opt for the NextDesk Terra, as it has a solid bamboo surface and is in most other ways identical to the Air.

IT'S LIKE BUYING A CAR

If you're in the market for a NextDesk, it's sort of like buying a car: there are lots of options. From different finishes and table-top colors, to a designer stability bar the company aptly names "Artisan Bar," which doubles as a foot rest. When you add up all the options, the final price for the desk you choose can be... surprising. Here's what NextDesk offers:

NextSpace keyboard platform - $347
NextDesk Pulse - $79
Power management - $99
Integrated Harmon Kardon sound system - $197
Vanity cover cable management system - $147
Single monitor arm - $197
Double monitor arm - $327
Casters - $99
Leveling pads - $99
Connect - $147
NextDesk Fit treadmill - $999

With all of the options checked above, you're looking at an additional $2,500 over the cost of the standard desk, not including custom color choices or custom designs. In fact, you can option out your desk with a battery pack that will let you adjust the desk no matter if it's near an outlet or not. Some of the options you can add on yourself without having to go through NextDesk. For example, an identical Belkin power strip can be had on Amazon for less than $25.

Stand or sit with style

We admit that we were initially convinced that standing and working or gaming wasn't a good way to go about our computing experience. After about two weeks of standing though, we can see the appeal. In fact, we started to prefer standing during most of our working hours. For gaming though, we'd still rather sit, although our friends at PC Gamer actually preferred standing.

The Artisan Bar also acts as a foot rest
The Artisan Bar also acts as a footrest.

One thing we highly recommend for anyone contemplating a standing desk: do yourself a favor and get a proper anti-fatigue standing mat. This isn't an option; a carpet just won't do. A proper standing mat will help your standing experience substantially and allow you to work for much longer hours. But this isn't really an article about whether or not you should sit or stand. That's entirely a personal preference.

If you're going to sit/stand and want to do it with style, the Air from NextDesk is unmatched in terms of build quality and looks. The Air (as well as the Terra) are quite a few steps ahead in terms of quality over the competition. At NextDesk price points though, the Air is not for everyone.

After assembling the Air and using it, we'll say that there's no other sit/stand desk we've ever used that was this well made. You can have a great standing desk, or a great sitting desk, or a beautiful desk, but if you want all of those in one desk, the Air from NextDesk would be our pick.

Total Pageviews

statcounter

View My Stats